Sort results:

Results : 1 - 10 of 26

SPE 092

Subsurface Characterization of the Edmonton-Area Acid-Gas Injection Operations

Acid gas dissolved in water in the Redwater oil field, and the resulting weak acidic solution ("sour" water) is injected into the depleted Leduc Formation Redwater reef trough 47 alternating wells. If only the natural setting is considered, ... Show Abstract

Bachu, S.  Buschkuehle, B.E.  Haug, K.  Michael, K.  2008-04-14

SPE 093

Subsurface Characterization of the Pembina-Wabamun Acid-Gas Injection Area

Subsurface Characterization of the Pembina-Wabamun Acid-Gas Injection Area If only the natural setting is considered, including geology and flow of formation waters, the basin to local-scale hydrogeological analysis indicates that injecting acid ... Show Abstract

Bachu, S.  Buschkuehle, B.E.  Haug, K.  Michael, K.  2008-04-14

SPE 095

Subsurface Characterization of the Brazeau Nisku Q Pool Reservoir for Acid Gas Injection

The experience gained since the start of the first acid-gas injection operation in Canada in 1989 shows that, from an engineering point of view, acid-gas disposal is a well-established technology. The operator has met all the current requirements ... Show Abstract

Bachu, S.  Buschkuehle, B.E.  Michael, K.  2008-04-14

ESR 2000-11

Suitability of the Alberta Subsurface for Carbon Dioxide Sequestration in Geological Media

Sequestration of anthropogenic CO2 in geological media is a potential solution to the release into the atmosphere of CO2, a greenhouse gas. Basically, there are five ways of sequestering CO2 in geological media: 1) through enhanced oil recovery ... Show Abstract

Bachu, S.  Brulotte, M.  Grobe, M.  Stewart, S.A.  2000-03-01

SPE 094

Stress Regime at Acid-Gas Injection Operations in Western Canada

Regulatory agencies in Western Canada impose safe limits on the injection pressure to maintain the pressure around the injection well below the fracturing threshold of the rocks. An evaluation of the stress regime at the acid-gas injection sites in ... Show Abstract

Bachu, S.  Haug, K.  Michael, K.  2008-04-14

BUL 060

Evaluation of effects of deep waste injection in the Cold Lake area, Alberta

The regional and local effects of underground injection of wastewater from in situ oil sands pilot plants have been evaluated at sites in the Cold Lake area, Alberta, using projected injection rates up to the year 2015. Geochemical effects were ... Show Abstract

Bachu, S.  Perkins, E.H.  Hitchon, B.  Lytviak, A.T.  Underschultz, J.R.  1989-01-01

BUL 058

Hydrogeology of the Swan Hills Area, Alberta: Evaluation for deep waste injection

A detailed hydrogeological study was carried out in a region defined as Tp 62-74 R 1-13 W5M, comprising 15 760 square km effectively centered on the Special Waste Injection Site of the Alberta Special Waste Management Corporation. The objective was ... Show Abstract

Hitchon, B.  Sauveplane, C.M.  Bachu, S.  Koster, E.H.  Lytviak, A.T.  1989-01-01

BUL 059

Hydrogeological and geothermal regimes in the Phanerozoic succession, Cold Lake area, Alberta and Saskatchewan

The natural, steady-state fluid flow and geothermal regimes were determined for a region defined as Tp 50-70, R 15 W3M to R 17 W4M (60 000 km2), including the Cold Lake Oil Sand Deposit and adjacent heavy oil areas to the south. Data processing was ... Show Abstract

Hitchon, B.  Bachu, S.  Sauveplane, C.M.  Ing, A.  Lytviak, A.T.  1989-01-01

BUL 061

Regional-Scale Subsurface Hydrogeology in Northeast Alberta

The hydrogeological regime of formation waters in the Phanerozoic sedimentary succession was determined for a region defined as Tp 70-103 W4 Mer (55-58 degrees;N latitude and 110-114 degrees;W longitude) in northeast Alberta, covering most of the ... Show Abstract

Bachu, S.  Underschultz, J.R.  Hitchon, B.  Cotterill, D.K.  1993-01-01

BUL 062

Industrial Mineral Potential of Alberta Formation Waters

Abstract: Nearly 130 000 analyses of formation waters from Alberta and adjacent areas were searched for contents of Ca, Mg, K, Br, I and Li exceeding specified regional exploration thresholds. The 5280 analyses meeting these criteria comprise the formation water industrial mineral data base, of which only 79 show these components xceeding the detailed exploration thresholds (Ca 60 000 mg/l, Mg 9000 mg/l, K 10 000 mg/l, Br 3000 mg/l, 1 100 mg/l, Li 75 mg/l). Concentration contour maps and data-point distribution maps identified areas and aquifers for which resource estimation was ustified. Using information from well logs, drillstem tests and core analyses, areas were identified in each target aquifer which met the combined criteria of exceeding the detailed exploration threshold for element concentration as well as aquifer thickness (>10m), porosity (>5%) and permeability (>10-14 m2, 10 millidarcies). Resource estimates were made, and are compiled, for these identified reas and aquifers. The estimates are based on element concentrations and water producibility alone, and indicate only a potential to be of economic interest; no implication with respect to economic recoverability should be construed. In view of the present market conditions, and taking into account comparisons with commercial operations elsewhere in the world, it is suggested that of the element concentrations found in Alberta formation waters only that of Li may be of additional interest at this time because contents are similar to those of the major USA producer. The study recommends that industry continue to analyze formation waters for Ca, Mg, Br, I and Li in selected aquifers and areas. Place Keywords 72e 72l 72m 73d 73e 73l 73m 74d 74e 74l 74m 82g 82h 82i 82j 82n 82o 82p 83a 83b 83c 83d 83e 83f 83g 83h 83i 83j 83k 83l 83m 83n 83o 83p 84a 84b 84c 84d 84e 84f 84g 84h 84i 84j 84k 84l 84m 84n 84o 84p alberta Theme Keywords formation waters industrial mineral potential precambrian

Hitchon, B.  Bachu, S.  Underschultz, J.R.  Yuan, L.P.  1995-01-01